Fantech REC 8XL - Exterior-Mounted Centrifugal Fan for Installation on Curb - 8" Duct - 409 cfm - REC8XL

When space is tight, Fantech's RE Series is the solution. With a lightweight, low profile design, and duct diameters from 6inch to 10inch, For roof mounting, these fans are available as either a flat plate or with a roof curb design. RE Series fans can also be mounted on an exterior wall when roof access is not suitable. An added benefit is whisper-quiet interior noise levels. RE Fans are simple to install; no installation extras are required. Simply mount the fan on the roof or wall, then connect the electrical supply to the easily accessible terminal box. The top cover is removable for access to the motor and wiring connections.

REC Series direct drive centrifugal fans have a flanged base for curb mounting. Duct diameters of  10″, air performance of 753 CFM, 100% speed controllable for high efficiency. Easily moves air from one or more venting points. Interior noise is kept to a minimum because the fan motor is located outside.

• Galvanized steel housing features baked powder-coat finish (can be painted to match decor)
• Unique external rotor motor has built-in thermal overload protection with automatic reset
• Permanently lubricated sealed ball bearings
• 100% speed controllable
• Excellent heat dissipation
• Suitable for airstream temperatures of up to 140° F
• CSA Certified
• Five-year warranty

Dimensional information is in inches.
† Duct connections are 1/8" smaller than duct size.

Fantech, Inc. certifies that the models shown herein are licensed to bear the AMCA Seal. The ratings are based on the tests and procedures performed in accordance with AMCA Publication 211 and comply with the requirements of the AMCA Certified Ratings Program. Performance certified is for installation type D – Ducted inlet, Ducted outlet. Performance ratings do not include the effects of appurtenances (accessories).