Waste King Commercial Garbage Disposal 5000-3 5 HP Three Phase

With a high-speed 5 HP 1740 RPM permanent magnet motor, the Waste King 5000-3 continuous feed disposal can efficiently dispose of food waste in commercial installations.


  • 5 HP disposal, 1740 RPM, Dual Voltage
  • Fan cooled motor with ball bearing construction and integral overload protection
  • Dynamically balanced for smooth, long wearing operation
  • Hush Cushion® mounting connection for 6″ or 8" cone or sink opening
  • Cast iron grind chamber with directional feeder ridges
  • Cast iron exit chamber with auxiliary water injection inlet
  • 10" diameter heavy duty, case stainless steel turntable
  • 3 jam resistant, hardened stainless steel swivel impellers with tungsten carbide inserts
  • 6 ripper bars integrated with turntable
  • Stainless steel undercutter blade
  • Threaded adjustable stainless steel legs
  • 1 Year Limited Warranty
  • Includes reset button


Horsepower   5
Motor speed   1740 RPM
Voltage   220
Amps   16
Phase   3
Hertz   60 Hz
Drain connection size   3
Motor Type   Permanent magnet
Feed   Continuous feed
Grind component material   Stainless steel
Grind chamber material   Corrosion proof polymer
Weight   250 lbs.
Warranty   1 Year Limited

5000-3 Installation Guide
5000-3 Specification Sheet

Model 5000-3 Application

High volume, mass feeding operations where peak loads are extreme and volume of difficult food waste is continuous or very, such as in large factory, restaurant or hotel.

Waste King® Exclusives

  • Stainless Steel Swivel Impellers swivel and retract if they are jammed so that they return to the grinding position during revolution, reducing motor overloading and costly jams. Waste King’s stainless steel swivel impellers eliminate the need for reversing switches and special ”de-jamming“ wrenches.
  • Stainless Steel Undercutter Blade located beneath the grind ring snips fibrous and stringy waste into small particles making them less likely to clog drain lines.
  • Hush Cushions® isolate the unit from metal to metal contact, significantly reducing noise level. Hush Cushions® are specially compounded and designed to withstand vibration and tension, and have a built-in safety splash guard.

Mounting Systems - Call For Price and Availability!


Models 5000-3 is equipped with a drain outlet for connection to a conventional 3" trap. The trap may be connected to a 3" branch waste line running directly into a waste stack. We recommend a slope in the waste line of not less than 1/4" per foot. Limit the 3" drain line to a turn free run of 15', then connect to a 4" or 6" line or stack. Connect directly to waste line, not through a grease interceptor.

NOTE: Model 5000-3 is a floorstanding unit. The legs can be cut shorter if the unit must be lower than the minimum shown for the screw adjustment. 2" clearance must be maintained beneath the motor for ventilation.

  • Model: 5000-3, Three Phase
  • Manufactured by: Waste King Commercial

Always Free Shipping


Add to Cart: