S&P Soler & Palau Inline Centrifugal Fan - Power Vent Kit Standard Exhaust KIT-PV-100x 4 inch duct - 153 cfm

S & P Soler & Palau Inline Centrifugal Fan - Power Vent Kit KIT-PV-100x 4 inch duct - 153 cfm (Single Vent)

KIT INCLUDES: 1 PV-100x fan and 1 plastic round intake valve (PG-100)

The POWERVENT (PV) series of direct drive centrifugal in-line duct ventilation fans consists of twelve model sizes 4”, 5”, 6”, 8”, 10” and 12.4” respectively. All models are designed for direct connection in-line with standard diameter round ducting. Airflow performance values range from 108 CFM (PV-100) up to 942 CFM (PV-315x). All PV fan models incorporate a powerful external rotor motor that has been factory matched to a non-overloading backward curved centrifugal fan wheel. This powerful combination enables the PV fans to deliver exceptional airflow performances against high static pressure typically found in ducted ventilation systems. All motors within PV fans are fully speed controllable using voltage or frequency control regulators. The PV series of duct exhaust or supply fans have been specifically designed for simple installation and many years of maintenance free operation. The PV fans can be mounted at any angle and at any point along the duct. The totally enclosed motor design allows the PV fans to operate in high moisture, lint and dust laden air. All models are manufactured with high quality materials and workmanship that is supported by a comprehensive five (5) year warranty. All PV Fans feature a corrosion resistant galvanized steel casing with black baked enamel coating and are supplied with a strong mounting bracket and prewired junction box. The interconnect wiring between the fan and the junction box provides installation flexibility and permits easy access to the fan for service and maintenance. The PV100x fans feature Class F Motor Insulation making them the ideal fans for Clothes Dryer Boosting applications.

Applications
The PV fans are ideally suited for a wide range of residential, commercial and industrial exhaust and intake ventilation applications.

Technical Specifications:
All twelve PV model sizes (PV 100, 100x, 125, 125x, 150, 150x, 200, 200x, 250, 250x, 315 and 315x) include the following specifications:

Warranty
Five (8) year limited warranty.

Casing
• Manufactured from high grade pressed galvanized steel, with black baked enamel coating.
• Extra long inlet and discharge collars make installation quick and trouble free.
• Supplied with a strong galvanized steel mounting bracket.
• Supplied with a prewired junction box.

Wheel / Impeller
• Backward curved centrifugal type.
• Factory matched to an external rotor motor and dynamically balanced to eliminate vibration.

Accessories
• Available with cord set. (Please call)
• A wide range of accessories is available

Motor
• Totally enclosed permanent split capacitor start and run external rotor motors.
• 115V 60Hz (single phase) electrical connection.
• Permanently sealed, self lubricating precision ball bearings.
• Safety Thermal Overload Protection Cut-Out (Automatic Reset Type).
• All Models are suitable for working airstreams up to 140° F

Code Approval
• All models have been independently safety tested by Underwriters Laboratories, Inc. and are UL and cUL Listed.
• Independently safety tested by Intertek Laboratories, and are ETL Listed.
• Independently tested for Airflow Performance. The PV range is licensed to bear the AMCA seal for Air Performance.
• The PV product range is certified by the Home
Ventilating Institute (HVI) for Air Performance.
 

  • Model: KIT-PV-100X
  • Manufactured by: S&P Soler and Palau Vent Fans



$244.99

Add to Cart: