S&P Soler & Palau Ventilation Fans - TD-150 6" Duct Inline Mixed Flow Duct Ventilation Fan - H 293 cfm

larger image

TD-150 Inline Mixed Flow Duct Ventilation Fan - High 293 CFM - 6" Duct

S & P Inline Fans for Bathroom Exhaust

If the strongest, quietest, bathroom exhaust system is what you seek…look no further. S&P Soler & Palau offers the perfect solution with the most options. The popular and exclusive Soler and Palau TD series bathroom exhaust kits (for single or dual venting points. All S&P bath kits offer remotely mounted fans featuring a powerful fan mounted in the attic (away from the living space). The result is a “Turbo” powered fan (much stronger than generally associated with bathroom exhaust) and yet a peacefully quiet operation.

TD-MIXVENT SERIES
The TD Series is the perfect bathroom ventilator for most typical installations. These units handle a significant amount of pressure (associated with most jobs) and unsurpassed air movement, with a minimum of space required. Suitable for 4” through 12”(kits available in 4” and 6”) round duct applications, from 97-1050 CFM (cubic feet of air per minute). Strong, quiet, easy to install (in even the tightest spaces) and years of trouble free operation.

General details of the TD-MIXVENT range:
Low profile mixed flow fans, manufactured in plastic material (up to model 200) or in galvanized steel sheet protected with Epoxy paint (model 250 and 315), with external terminal box, removable motor-impeller assembly and adjustable single-phase motor, Class B, IP44.

TD-MIXVENT Specifications

Warranty
Five (5) year limited warranty.

Range
The TD-MIXVENT series consists of eight (8) nominal sized in-line fans. All models are specifically designed for direct connection in-line with industry standard diameter round ducting.

Construction
The TD-MIXVENT models 100, 100x, 125,150, 200 and 200x are manufactured in tough reinforced plastic, models 250 and 315 have a metal casing and are finished in a tough epoxy- polyester paint coating. The TD fan duct connection flanges are manufactured from reinforced plastic, except for models 200, 200x, 250 and 315 which are constructed from epoxy-polyester coated metal.

Impellers
The impeller blades for models 100, 100x, 125 and 150 and 200x are molded in tough ABS plastic. Models 200, 250 and 315 are metal.

Motors
Models 100, 100x and 125:

Single-phase, 120V 60Hz, shaded pole induction asynchronous motor in die cast aluminum. All motors include direct two speed connection and are also suitable for voltage speed control.

Class ll electrical insulation (model 100) & Class l (models 100x and 125)
IP 44 Protection
Class B Motor Insulation
Safety auto reset Thermal Overload Protection (fuse type)
Self-lubricating sleeve bearings.
Suitable for working airstreams up to 104° F (40°C).

Models 150, 200, 200x, 250 and 315:

Single-phase induction asynchronous motor, with permanent capacitor and external rotor constructed of die cast aluminum. All models include direct two speed connection and are also suitable for voltage speed control.