Fantech - HRV Heat Recovery Ventilator - SER 200



Fantech - SER 200 HRV Heat Recovery Ventilator - Fresh Air Appliance

SER 200

  • Airflow up to 190 CFM @ 0.4" PS serves 7 bedroom homes
  • Enthalpy core
  • Three speeds
  • “N” Series does not have defrost
  • Ideal for garage, attic, basement or mechanical room installations
  • Dehumidifies and cools incoming air
  • 6″ side ports


Fantech's larger residential, full-featured ERV for large house projects, the SER 200 is designed for higher static pressure and higher airflow applications. The SER 200 unit brings a continuous supply of fresh air into a home while exhausting an equal amount of contaminated air. The enthalpic core at the center of the unit transfers heat and moisture from the incoming air to the outgoing air that was cooled and dried by the building's air conditioner.

How it Works

When it is warm and humid outside and the indoors are cooled and dehumidified already, the ERV pre-cools the fresh incoming air and transfers a portion of the incoming humidity into the exhaust air, reducing the ventilation load. Reducing the load on the homes air conditioner, saves on cooling costs. This unit is designed for warmer, humid climates with longer cooling seasons.

Defrost Cycle

The unit has a built-in defrost mechanism that activates at 23°F in order to prevent the energy transfer core from freezing.

Product Details

Two (2) factory-balanced fans with backward curved blades. Motors come with permanently lubricated, sealed ball-bearings to guarantee long life and maintenance-free operation.

Energy Recovery Core
AHRI certified core made from water vapor transport durable polymer membrane that is highly permeable to humidity. The ERV core is freeze tolerant and water washable. Core dimensions are 12” x 12” (305 x 305 mm) with a 14.25” (362 mm) depth.

Frost Control
A preset frost control sequence is activated at an outdoor air temperature of 23°F (-5°C) and lower. During the defrost sequence, the supply blower shuts down & the exhaust blower switches into high speed to maximize the effectiveness of the defrost strategy. The unit then returns to normal operation, and continues cycle.

Core, filters, fans and drain pan can be easily accessed through latched door. Core conveniently slides out on our new easy glide core guides. 17" (432 mm) of clearance is recommended for removal of core.

22 gauge galvanized steel. Baked power-coated paint for a superior adhesion and resistance.

Cabinet is fully insulated with 1” (25 mm) high density expanded polystyrene.

Two (2) washable electrostatic panel type air filters 11.7” (292mm) x 15” (380mm) x 0.125” (3mm).

External three (3) position (Low/Stand By/Medium) rocker switch that will offer continuous ventilation. Fantech offers a variety of external controls. (see accessories)

5 years on energy recovery core, 7 year on motors, and 5 year on parts.

Requirements and standards

  • Complies with the UL 1812 requirements regulating the construction and installation of Heat Recovery Ventilators
  • Complies with the CSA C22.2 no. 113 Standard applicable to ventilators
  • Complies with the CSA F326 requirements regulating the installation of Heat Recovery Ventilators
  • Technical data was obtained from published results of test relating to CSA C439 Standards
  • Energy Recovery Core is ISO 846 certified for mold and bacteria resistance and AHRI certified (certificate #8931529)
  • Technical data was obtained from published results of test relating to AHRI 1060 Standards

Product Documents

Detailed Product Information
  • Products Regular Price: $1206.95
  • Model: SER 200
  • Manufactured by: Fantech Exhaust Fans
  • Condition: New
  • Payments Accepted: AMEX, Visa, MasterCard, Discover and PayPal
  • Shipping Available to: United States
  • Available at: Wave Plumbing Supply